Rapid production method of heavy duty hose clamp
Time of Release：
2021-11-25
The heavy duty hose clamp manufacturer tells you that most of the pipe clamps used to fix pipes on the market are reverse clamps, that is, two semi-circular pipe clamps are fixed with bolts at both ends, and the outer wall of the pipe is tightly clamped.
The heavy duty hose clamp manufacturer tells you that most of the pipe clamps used to fix pipes on the market are reverse clamps, that is, two semi-circular pipe clamps are fixed with bolts at both ends, and the outer wall of the pipe is tightly clamped. The manufacturer of heavy duty hose clamp tells you that this fixing method is slow, cumbersome to install, and has a single structure. One kind of pipe clamp is only suitable for one kind of pipe fittings, the bolts are easy to rust, the service life is short, and the cost is low. Very high.
In order to solve the above technical problems, the manufacturer of heavy duty hose clamp provides a light duty hose clamp. In the present invention including a buckle, the buckle is provided with two bottom brackets, the lower end of the bracket has a threaded sleeve, and the opening is a buckle. The bottom wall of the socket is set on the left side. , The socket is provided with a claw on the inner wall of the socket with a top opening buckle provided on the inner wall of the plug, the plug is provided with a plurality of claws and the inverted teeth clearance fit, fixed mutual engagement and pressing, the card between the plug and the socket Toothed esophagus. The quick pipe clamp is provided with openings on the rear side of the left threaded sleeve and the front side of the right threaded sleeve. Quick pipe clamp, the top of the outer wall of the socket is provided with an arc end extending to the left. The bottom end of the pipe clamp plug is provided with an arc-shaped end.
The new heavy duty hose clamp has a novel structure. The entire hose clamp is composed of a bracket and a ring buckle. A threaded sleeve is installed on the bracket. A number of inverted teeth are designed in the plug end of the butt joint of the ring buckle. The inner wall is designed with inverted teeth corresponding to the inverted teeth, the plug is inserted into the socket, and the inner wall of the socket mouth is designed with inverted teeth. The tooth is clamped in one of the inverted tooth grooves to achieve the locking of the ring buckle. The design of multiple inverted tooth grooves can be adapted to pipes of different sizes. The design is reasonable, the installation is quick, convenient and practical.
The heavy duty hose clamp manufacturer tells you that the hose clamp has a novel structure. The entire hose clamp consists of a bracket and a ring buckle. A spiral sleeve is installed on the bracket. The end of the ring buckle sleeve is designed with multiple inverted teeth. The inner wall of the sleeve opening is designed for inverted teeth. The inverted tooth of the slot, the plug is inserted into the inner wall of the socket, and the inverted tooth is clamped in one of the inverted tooth grooves to realize the locking of the ring buckle. The manufacturer of heavy duty hose clamp tells you that the design of multiple inverted grooves makes it suitable for non-size pipe fittings. The design is reasonable, the installation is quick, and it is convenient and practical.
关键词：
Cheap,heavy,duty,hose,clamp,from,China,manufacturer,Wholesale,heavy,duty,hose,clamp,supplier(s),china
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.