The scope and characteristics of heavy duty hose clamp
Time of Release：
2021-11-24
Do you know the scope and characteristics of heavy duty hose clamp? Let's take a look together below.
Do you know the scope and characteristics of heavy duty hose clamp? Let's take a look together below.
1.heavy duty hose clamp application range
The light series of pipe clamps are used for ordinary mechanical pressure pipes of 6 sizes series, and the outer diameter of the pipe is 6-57mm.
Duplex series pipe clamps are used for mechanical pressure pipes of 5 sizes series, the outer diameter of the pipe is 6-42mm.
The heavy-duty series of pipe clamps are used in 8 series of high mechanical pressure pipes, the outer diameter of the pipe is 8-273mm.
2. Material characteristics of heavy duty hose clamp
Density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color
3. Installation program for heavy duty hose clamp
Before assembling on the welding plate, in order to better determine the direction of the clamp, the manufacturer of heavy duty hose clamp recommends marking the fixing place first, then welding on the welding, inserting the lower part of the pipe clamp body, and fixing it when it is placed. Of the tube. Put on the other half of the pipe clamp body and cover plate, and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put it The upper half of the pipe clamp body and the cover plate are fixed with screws.
Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, through the anti-loosening cover plate Prevent it from turning. Then install two pipe clamps in the same way as above.
Assembling the elbow, when assembling the elbow, it should be directly fixed with Yongsheng pipe clamps at the front and rear of the elbow. The manufacturer of heavy duty hose clamp recommends that such a support point should be a fixed position.
关键词：
customized,heavy,duty,hose,clamp,factory,china,heavy,duty,hose,clamp,Wholesale,Price
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.