Some problems in the installation process of heavy duty hose clamp
Time of Release：
2021-11-29
When the heavy duty hose clamp pipe joint is in a free state, it will not bear the weight of the pipe or be sheared by external forces.
When the heavy duty hose clamp pipe joint is in a free state, it will not bear the weight of the pipe or be sheared by external forces.
Problems during installation of heavy duty hose clamp:
1. The heavy duty hose clamp must be free of defects such as pores, sand holes, shrinkage and cracks.
2. The size of the end pipe diameter should be selected as a positive deviation. Otherwise, the pressure of the sealing ring clamp will be insufficient, and the sealing effect of the joint will be affected.
3. The material and performance of the sealing ring must meet the requirements, and the sealing surface must be free of bubbles, impurities, cracks and uneven defects, and aging rubber rings cannot be used.
4. When welding the end tube and the snap ring, impurities will be scattered, which will affect the sealing of the end tube. Before installation, the welding slag on the sealing surface must be cleaned to ensure the sealing effect.
The left and right end pipes are matched with heavy duty hose clamp before leaving the factory to enhance the sealing effect. In actual engineering, it is not recommended to directly replace the end pipe with a conventional pipe, nor is it recommended that the end be vertical. The surface of the end tube relative to the shaft and the end surface itself must be flat and variable in size. If the size is not standard, the expansion and contraction of the joint is greatly reduced, which cannot meet the requirements of use.
The heavy duty hose clamp has a small diameter and a large diameter. Choose according to the parts to be connected. For sewer pipes that require pressure resistance and fixation capabilities, large diameter, tight, firm, and adjustable hose clamps are required. The heavy duty hose clamp must be resistant to buttons and pressure to prevent accidents caused by these products. This is the importance of hose clamps.
关键词：
Cheap,heavy,duty,hose,clamp,from,China,manufacturer,Wholesale,heavy,duty,hose,clamp,supplier(s),china
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.