The manufacturer of Single Ear Hose Clamp takes you to understand the key points of choosing hose clamp products
Time of Release：
2021-12-20
The manufacturer of Single Ear Hose Clamp tells you that the project should always be reliable. The hose clamp products are often connected with pipe racks and other products, so they are inextricably linked.
The manufacturer of Single Ear Hose Clamp tells you that the project should always be reliable. The hose clamp products are often connected with pipe racks and other products, so they are inextricably linked. Therefore, the quality of the hose clamp products is not sloppy. Let the editor of the Single Ear Hose Clamp manufacturer share with you the main points about the quality of the hose clamp products.
1. Stainless steel hose clamps must not have defects such as pores, blisters, shrinkage and cracks.
2. The manufacturer of Single Ear Hose Clamp tells you that the material and performance of the sealing ring must meet the requirements, and there must be no bubbles, impurities, cracks, uneven defects on the sealing surface, and aging rubber rings cannot be used.
3. The manufacturer of Single Ear Hose Clamp tells you that the moving distance of the clasp in the clamp is theoretically half of the expansion and contraction of the joint. It needs to be measured. If it cannot be reached, it cannot meet the expansion and contraction requirements of the pipeline. The manufacturer of Single Ear Hose Clamp tells you that in order to promote the sealing effect, the left and right end pipes are matched with the clamp before leaving the factory. It is not advisable to directly replace the end pipes with ordinary pipes in actual engineering, and the end face of the end pipe is perpendicular to the axis and the flatness of the end face itself. If there are certain requirements, non-standard size will greatly reduce the expansion and contraction of the joint, which cannot meet the requirements of use.
4. The manufacturer of Single Ear Hose Clamp tells you that the size of the end pipe diameter should be selected with a positive deviation, otherwise the clamping force on the sealing ring is not enough, which will affect the sealing effect of the joint.
The above is the sharing of Single Ear Hose Clamp manufacturers. You can use it as a reference when choosing hose clamp products. Of course, if you need a good stainless steel hose clamp product, you can also contact us directly.
关键词：
Cheap,Single,Ear,Hose,Clamp,supplier(s),china,Wholesale,Single,Ear,Hose,Clamp,factory
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.