worm drive hose clamp installation precautions
Time of Release：
2021-12-07
Positive installation method: worm drive hose clamp should be installed according to the torque value recommended by the manufacturer.
Positive installation method: worm drive hose clamp should be installed according to the torque value recommended by the manufacturer.
Incorrect installation method 1: Although the worm drive hose clamp can also be twisted to a suitable torque value, the expansion joint works under pressure, which will cause the worm drive hose clamp to fall off the edge of the hose, which will cause the hose to leak. .
Incorrect installation method 2: Although the worm drive hose clamp can also be twisted to a suitable moment, the hose expansion and local vibration will force the worm drive hose clamp to move and cause the hose to leak.
Incorrect installation method 3: Although the worm drive hose clamp can also be tightened, the expansion, contraction and local vibration of the hose will cause the hose wall to be subjected to cutting force, and will also damage the strength of the hose. The constant vibration of the worm drive hose clamp can also cause hose leakage.
Summary: Under normal circumstances, the length of the hose inserted into the iron pipe is 45mm, and the installation position of the worm drive hose clamp is about 25mm away from the edge of the hose. After tightening the worm drive hose clamp, the worm drive hose clamp steel band is slightly lower than the hose. Do not tighten too much. , Otherwise it will damage the hose.
关键词：
customized,worm,drive,hose,clamp,from,China,manufacturer,china,worm,drive,hose,clamp,Wholesale,Price
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.