What should be paid attention to in the stamping of the customized American Type Hose Clamp
Time of Release：
2022-06-08
Check the gap of the mold. If the gap of the American Type Hose Clamp mold is not well controlled, the punch needs a large demoulding force when it is released from the material. If this is the reason for the punch being bitten by the material, it is necessary to replace the die with the correct clearance.
In the stamping process of the customized American Type Hose Clamp, in order to avoid the situation that the punch in the metal stamping die will be bitten by the material and cannot be taken out, the hose clamp manufacturers needs to check the following items during processing:
1. Check the gap of the mold. If the gap of the American Type Hose Clamp mold is not well controlled, the punch needs a large demoulding force when it is released from the material. If this is the reason for the punch being bitten by the material, it is necessary to replace the die with the correct clearance.
2. Check the state of the processed materials. The processing material of the customized American Type Hose Clamp should be kept clean, otherwise when there is dirt attached to the mold, the punch will be bitten by the material and cannot be processed.
3. The cutting edge of punch and lower die. The sharp-edged American Type Hose Clamp mold can produce beautiful cut surfaces. A dull edge requires additional punching force and results in a rough workpiece cross-section.
4. Avoid deformed materials. The warped American Type Hose Clamp material will clamp the punch after punching the hole, causing the punch to bite. If there is a deformed material, please flatten it before processing.
5. Check the hardness of the material. There are also many kinds of materials used in customized American Type Hose Clamp. When making hose clamps, the hardness of the material should be tested. Different types of the customized American Type Hose Clamp require different hardness levels for the processing technology.
关键词：
American,Type,Hose,Clamp,customized,American,Type,Hose,Clamp,Hose,Clamp
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.