What are the main points of worm drive hose clamps stainless steel products
Time of Release：
2021-12-27
The manufacturer of worm drive hose clamps stainless steel takes you to understand that the engineering should always be reliable. The hose clamp products are inextricably linked because they are often connected to some pipe racks and other products.
The manufacturer of worm drive hose clamps stainless steel takes you to understand that the engineering should always be reliable. The hose clamp products are inextricably linked because they are often connected to some pipe racks and other products. Therefore, the quality of hose clamps is not sloppy at all, let the editor of the worm drive hose clamps stainless steel manufacturer share with you the main points about the quality of hose clamps.
1. The worm drive hose clamps stainless steel shall not have defects such as pores, sand holes, shrinkage holes and cracks.
2. The material and performance of the sealing ring must meet the requirements. There must be no bubbles, impurities, cracks, unevenness of unevenness on the sealing surface, and aging rubber rings cannot be used.
3. The moving distance of the clasp in the clamp is theoretically half of the expansion and contraction of the joint. It needs to be measured on the spot. If it cannot be reached, the expansion and contraction requirements of the pipeline cannot be met. In order to promote the sealing effect, the left and right end pipes are matched with the clamp before leaving the factory. In actual engineering, it is not advisable to directly replace the end pipes with ordinary pipes. Moreover, the perpendicularity of the end surface of the end pipe to the axis and the flatness of the end surface itself have certain requirements, and the size is not standard. Therefore, the expansion and contraction of the joint is greatly reduced, which cannot meet the requirements of use.
4. The size of the end pipe diameter should be selected with a positive deviation, otherwise the pressing force of the clamp on the sealing ring is not enough, which will affect the sealing effect of the joint.
The above is the sharing of worm drive hose clamps stainless steel manufacturers. You can use it as a reference when choosing hose clamp products. Of course, if you need good worm drive hose clamps stainless steel products, you can also contact us directly.
关键词：
customized,worm,drive,hose,clamps,stainless,steel,from,China,manufacturer,china,worm,drive,hose,clamps,stainless,steel,Wholesale,Price
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.