What are the factors that affect the installation quality of the good price and quality Norma Torro Hose Clamp


Time of Release:

2022-04-11

The good price and quality Norma Torro Hose Clamp must not have defects such as pores, sand holes, shrinkage cracks, etc.

There are three things to keep in mind when installing Nomatoro hose clamps:
1. The good price and quality Norma Torro Hose Clamp must not have defects such as pores, sand holes, shrinkage cracks, etc. The material and performance of the sealing ring of the Norma Torro Hose Clamp must meet its requirements. The sealing surface of the good price and quality  Norma Torro Hose Clamp must not have air bubbles, impurities, cracks, uneven defects, and Norma Torro Hose Clamp cannot use aging rubber band.

Norma Torro Hose Clamp

2. The moving distance of the snap ring of the good price and quality Norma Torro Hose Clamp in the clamp is theoretically half of the expansion and contraction of the joint. This distance of Norma Torro Hose Clamp must be measured actually. If it cannot be reached, that cannot meet the expansion and contraction requirements of the pipeline. In order to promote the sealing effect, the left and right end pipes should be matched on the good price and quality Norma Torro Hose Clamp before leaving the factory. The perpendicularity to the axis and the flatness of the end face itself have certain requirements. If the size is not standard, the expansion and contraction of the joint will be greatly reduced, which cannot meet the requirements of the Norma Torro Hose Clamp.

3. The diameter of the end pipe of the good price and quality Norma Torro Hose Clamp should be selected correctly, otherwise the clamping force of the clamp on the sealing ring will not be enough, which will affect the sealing effect of the joint of Norma Torro Hose Clamp.
 

关键词:

good,price,and,quality,Norma,Torro,Hose,Clamp,Norma,Torro,Hose,Clamp,Hose,Clamp