The manufacturer of worm drive hose clamp will show you the scope and characteristics of hose clamps
Time of Release：
2021-10-11
Many people want to know the scope and characteristics of hose clamps. The worm drive hose clamp manufacturer will take you to find out today.
Many people want to know the scope and characteristics of hose clamps. The worm drive hose clamp manufacturer will take you to find out today.
1. Application range of pipe clamps
The manufacturer of worm drive hose clamp tells you that the light-duty hose clamps are applied to ordinary mechanical pressure pipes of 6 sizes series, and the outer diameter of the pipe is 6-57mm.
The manufacturer of worm drive hose clamp tells you that the duplex series of hose clamps are applied to mechanical pressure pipes of 5 sizes series, and the outer diameter of the pipe is 6-42mm.
The manufacturer of worm drive hose clamp tells you that the heavy-duty series of hose clamps are used for high mechanical pressure pipes of 8 sizes series, the outer diameter of the pipe is 8-273mm.
2. Material characteristics of pipe clamps
Density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color.
3. Pipe clamp installation procedure
Assembled on the welding plate, the manufacturer of worm drive hose clamp tells you that before assembling, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld on the welding, insert the lower part of the pipe clamp body, and place it. The pipe that needs to be fixed. Then put the other half of the pipe clamp body and cover plate, and tighten them with screws. The manufacturer of worm drive hose clamp tells you not to directly weld the bottom plate with the hose clamp installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put it The upper half of the pipe clamp body and the cover plate are fixed with screws.
The manufacturer of worm drive hose clamp tells you to fold up the assembly, the guide rail can be welded on the foundation, or fixed with screws. First install the upper and lower half of the tube clamp body, put the tube to be fixed, and then put the upper half of the tube clamp body, with screws Fixed, prevent it from rotating by the anti-loosening cover. Then install the second pipe clamp in the same way as above.
Assembling the elbow, when assembling the elbow, it should be directly fixed with Yongsheng pipe clamps at the front and rear of the elbow. The manufacturer of worm drive hose clamp recommends that such a support point should be a fixed position.
关键词：
china,worm,drive,hose,clamp,company,Low,price,worm,drive,hose,clamp,from,China,manufacturer
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.