Precautions when connecting Single Ear Hose Clamp
Time of Release：
2021-12-22
What should we pay attention to when connecting Single Ear Hose Clamp? The following Single Ear Hose Clamp manufacturer tells you and will take you to find out.
What should we pay attention to when connecting Single Ear Hose Clamp? The following Single Ear Hose Clamp manufacturer tells you and will take you to find out.
Precautions when installing Single Ear Hose Clamp:
1. The distance L between the snap ring and the end pipe must be controlled. The control of L should be combined with the instruction manual. When the gap between the two pipe ends is small, make sure that the snap ring just sticks to the inclined surface.
2. The manufacturer of Single Ear Hose Clamp tells you that when the position of the clasp is determined, the size of the gap between the two pipe ends should be determined by calculation according to the elongation of the pipe and the ambient temperature during construction. Ensure the deviation of the size during construction.
3.The manufacturer of Single Ear Hose Clamp tells you that under the premise of a certain moving distance, the height and width of the weld between the snap ring and the end tube and the perpendicularity error between the snap ring plane and the end tube axis are larger, and the expansion and contraction of the joint will be smaller. , The use effect is worse.
4. The manufacturer of Single Ear Hose Clamp tells you that splash impurities during welding of the end tube and the snap ring will affect the end tube sealing. The welding slag on the sealing surface must be removed before installation to ensure the sealing effect.
In addition, because the grooved pipe fittings are finished parts, the operation space required on site is small, and the installation against the wall and the corner can be realized, and the operation difficulty is greatly reduced, thereby saving floor space and beautifying the effect of pipeline installation. The manufacturer of Single Ear Hose Clamp tells you that the original characteristics of the pipeline will not be affected. Groove pipe fittings are connected. Only a groove is extruded on the outer surface of the connected pipe with a roll groove machine without destroying the inner wall structure of the pipe. This is a grooved pipe fitting. The technical advantages of the connection. The manufacturer of Single Ear Hose Clamp tells you that if you use traditional welding operations, many pipes with anti-corrosion coating on the inner wall will be damaged. Therefore, the specification stipulates that galvanized pipes, plastic-lined steel pipes, steel-plastic composite pipes, etc. must not be welded and flanged, otherwise secondary treatment is required.
关键词：
Cheap,Single,Ear,Hose,Clamp,supplier(s),china,Wholesale,Single,Ear,Hose,Clamp,factory
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.