Norma Torro Hose Clamp manufacturer takes you to understand the influencing factors in the installation process
Time of Release：
2021-12-03
Norma Torro Hose Clamp is a connecting device that connects the piping parts, valves and piping parts of the Norma Torro Hose Clamp tank. Used to tighten quick connectors.
Norma Torro Hose Clamp is a connecting device that connects the piping parts, valves and piping parts of the Norma Torro Hose Clamp tank. Used to tighten quick connectors. Usually, both joints have gaskets, rubber, silicone grease and PTFE. Good performance, high sealing degree and simple installation.
Influencing factors during the installation of Norma Torro Hose Clamp:
1. Norma Torro Hose Clamp shall not have defects such as pores, sand holes, shrinkage and cracks.
2. The size of the end pipe diameter should be positive deviation, otherwise the clamping force of the sealing ring is not enough, which will affect the sealing effect of the joint.
3. The material and performance of the sealing ring must meet the requirements. There should be no bubbles, impurities, cracks, uneven defects on the sealing surface, and no aging rubber rings should be used.
4. When welding the end pipe and Norma Torro Hose Clamp, the impurities are scattered, which affects the sealing of the end pipe. Before installation, clean the welding slag on the sealing surface to ensure the sealing effect.
5. Theoretically, the movement distance of Norma Torro Hose Clamp in the clamp is half of the joint expansion. The actual measured value must be measured. If not, it will not be able to meet the expansion and contraction requirements of the pipeline. In order to improve the sealing effect, the left and right tubes are the same as the Norma Torro Hose Clamp before leaving the factory. In actual engineering, it is recommended not to directly replace the end pipe with ordinary pipes. The end face of the end pipe should be perpendicular to the axis, and the flatness of the end face itself is required and the size is not standard. The joint expansion is greatly reduced, which cannot meet the requirements of use.
关键词：
customized,Norma,Torro,Hose,Clamp,from,China,manufacturer,china,Norma,Torro,Hose,Clamp,Wholesale,Price
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.