Introduction of hose clamps
Time of Release：
2021-09-14
The hose clamp is installed on the ground guide rail. The guide rail can be welded to the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90 degrees.
The hose clamp is installed on the ground guide rail. The guide rail can be welded to the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90 degrees, insert the lower half of the tube clamp body into the nut, and put the tube to be fixed, Then put the upper half of the pipe clamp body and cover plate, and fix it with screws.
Light series pipe clamps are used for ordinary mechanical pressure pipes of 6 sizes series, and the outer diameter of the pipe is 6-57mm.
Duplex series pipe clamps are used for mechanical pressure pipes of 5 sizes series, the outer diameter of the pipe is 6-42mm.
The heavy-duty series of pipe clamps are used in 8 series of high mechanical pressure pipes, the outer diameter of the pipe is 8-273mm.
Hose clamp density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color
Before assembling the hose clamp on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld it, insert the lower part of the pipe clamp body, and put the pipe to be fixed.. Put on the other half of the pipe clamp body and cover plate, and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed.
Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body , fixed with screws, through the anti-loosening cover plate Prevent it from turning. Then install the second pipe clamp in the same way as above.
Assembling the elbow, when assembling the elbow, it should be directly fixed with Yongsheng pipe clamps at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.
1. The hose clamp is divided into full circle heavy pipe clamps, full circle light pipe clamps, long half pipe clamps, short half pipe clamps, rotating pipe clamps, rotating felt pipe clamps, J-shaped pipe clamps, etc. According to Ningbo Hanlin Electric Limited company classification.
2. The hose clamp is divided into plastic ABS pipe clamps, aluminum alloy pipe clamps, stainless steel pipe clamps, carbon steel pipe clamps, etc. according to the material. Classified by materials commonly used in the market.
关键词：
customized,hose,clamp,products,on,sales,Low,price,hose,clamp,from,China,manufacturer
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.