How to use the good price and quality Norma Torro Hose Clamp on seals
Time of Release：
2022-04-14
Start by flipping the sealing ring over and putting on the sealing position of a steel tube where the Norma Torro Hose Clamp is installed.
Start by flipping the sealing ring over and putting on the sealing position of a steel tube where the Norma Torro Hose Clamp is installed. Then align the other steel pipe so that the sealing ring is located in the middle of the two pipe joints. The interface is where the good price and quality Norma Torro Hose Clamp is installed.
Check the axis line of the pipe, make the axis lines of the two pipes coincide, install the good price and quality Norma Torro Hose Clamp on the upper and lower parts of the outer side of the sealing ring at the joint, and snap the edge of the Norma Torro Hose Clamp into the groove of the steel pipe.
Squeeze the ears of the Norma Torro Hose Clamp with both hands and tap the edge of the good price and quality Norma Torro Hose Clamp lightly with a hammer (rubber mallet) so that the upper and lower Norma Torro Hose Clamp are close together, at the Norma Torro Hose Clamp screw holes Insert the bolts and use a torque wrench to tighten the Norma Torro hose clamp bolts in even rotation. Check that the Norma Torro Hose Clamp is fully seated in the grooves.
关键词：
Norma,Torro,Hose,Clamp,Hose,Clamp,,good,price,and,quality,Norma,Torro,Hose,Clamp
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.