How to use and install the customized Mini Hose Clamp
Time of Release：
2022-12-15
Since this Tianjin Nuocheng Mini Hose Clamp is often used to fasten relatively soft pipes, it cannot be fastened in the same way as ordinary pipes. The method of using the customized Mini Hose Clamp is as follows. First, put the selected hose clamp of the appropriate size on the oil pipe, and then insert the pipe. At this time, the Tianjin Nuocheng Mini Hose Clamp is in the middle of the pipe bound by it.
The Tianjin Nuocheng Mini Hose Clamp is a throat hoop with the smallest diameter. The screw size of the customized Mini Hose Clamp is smaller than that of the ordinary hose clamp, and it can be tightened to a hose with an inner diameter of 8 mm.
Since this Tianjin Nuocheng Mini Hose Clamp is often used to fasten relatively soft pipes, it cannot be fastened in the same way as ordinary pipes. The method of using the customized Mini Hose Clamp is as follows. First, put the selected hose clamp of the appropriate size on the oil pipe, and then insert the pipe. At this time, the Tianjin Nuocheng Mini Hose Clamp is in the middle of the pipe bound by it.
Then use a screwdriver to tighten the customized Mini Hose Clamp little by little. Be careful to move slightly slowly. Do not use the same force as when tightening other hose clamps, otherwise it will easily cause excessive tightening force and damage the hose. After tightening the Tianjin Nuocheng Mini Hose Clamp, remember to check whether there is water leakage or oil leakage. If not, it means that the customized Mini Hose Clamp is installed properly and can be used with confidence.
关键词：
Mini,Hose,Clamp,Tianjin,Nuocheng,Mini,Hose,Clamp,customized,Mini,Hose,Clamp
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.