How to install a China Double Ear Clamp material
Time of Release：
2022-10-22
When installing the China Double Ear Clamp, put the rubber sealing ring on the end of the pipe and connect it with a split clamp to achieve the effect of tightening and sealing. When installing, select the appropriate China Double Ear Clamp material to cover the front and rear ends of the water pipe respectively, and then tighten it with a flat screwdriver. The China Double Ear Clamp should be installed according to the manufacturer's recommended torque values.
The China Double Ear Clamp material is an indispensable accessory in pipeline connection, which is widely used, such as in secondary water supply equipment, oil pipeline, water pipeline, automobile industry and so on.
When installing the China Double Ear Clamp, put the rubber sealing ring on the end of the pipe and connect it with a split clamp to achieve the effect of tightening and sealing. When installing, select the appropriate China Double Ear Clamp material to cover the front and rear ends of the water pipe respectively, and then tighten it with a flat screwdriver. The China Double Ear Clamp should be installed according to the manufacturer's recommended torque values.
If there is a loose phenomenon or the force cannot be tightened, it means that the China Double Ear Clamp material has been damaged and must be replaced with a new one. The tightening force of the normal throat hoop must be relatively strong. After installation, the position of the China Double Ear Clamp on the water pipe should be slightly lower than the surface of the water pipe.
关键词：
China,Double,Ear,Clamp,material,China,Double,Ear,Clamp,Double,Ear,Clamp,material
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.