How to deal with worm drive hose clamps stainless steel
Time of Release：
2021-12-29
How to deal with worm drive hose clamps stainless steel lax sealing? Someone asked this question recently, let me take you through it below.
How to deal with worm drive hose clamps stainless steel lax sealing? Someone asked this question recently, let me take you through it below.
Worm drive hose clamps stainless steel itself is not a seal, it only provides radial clamping force. There are several possible reasons for preventing the hose from being pulled and the seal is not tight:
The hose is not compatible with the joint: the manufacturer of worm drive hose clamps stainless steel tells you that the inner diameter of the hose should be slightly smaller than the outer diameter of the joint. Wrinkles are just like tying a belt. The pants are wrinkled. The wrinkles are where there are deep axial scratches on the leaking channel joints. The scratches are used as the leaking channel and the pressure is too high, which has exceeded the can withstand the sealing structure. Within the limits.
The above is the worm drive hose clamps stainless steel manufacturer tells you how to deal with the problem of lax sealing, I hope it will help you.
关键词：
customized,worm,drive,hose,clamps,stainless,steel,from,China,manufacturer,china,worm,drive,hose,clamps,stainless,steel,Wholesale,Price
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.