How to configure the wire hose clamp
Time of Release：
2021-08-31
In today's industrial and living fields, the wire hose clamp device is favored by more and more people for its unique corrosion resistance, aging resistance, environmental protection and safety.
In today's industrial and living fields, the wire hose clamp device is favored by more and more people for its unique corrosion resistance, aging resistance, environmental protection and safety. Especially in the construction industry, the wire hose clamp device can not only replace traditional building materials, but also has the advantages of energy saving, saving materials, improving the living environment, protecting the ecology, improving the function and quality of the building, reducing the building area, and reducing the weight of the building. In the fields of building water supply, urban water supply and drainage, and gas pipelines, it has also become the future development trend of the pipeline industry.
The growth rate of the wire hose clamp equipment market is about 4 times the average growth rate of the pipeline market, far exceeding the development speed of the national economy of various countries. In developed countries, especially Europe and the United States, it has achieved good development and successful application. The use of steel wire hose clamps in my country has doubled and has become a new material in the construction industry.
Wire hose clamp devices are widely used in urban water supply and drainage, building water supply and drainage, hot water supply, heating, heating and other fields. One of the important application fields is water supply pipes. In the wire hose clamp device, the number of pipes has advantages, but the pipeline application practice in developed countries in recent years has shown that the development speed of polyolefin pipes is much higher than that of water supply pipes. The development of wire hose clamp equipment is unstoppable, and the pipeline industry has seen an investment boom, which has created opportunities for the rapid development of my country's pipeline industry. The utilization rate has gradually increased and the growth rate has been rapid. Let's take a look at the installation of wire hose clamps.
Before installing the equipment on the soldering board, determine the orientation of the fixture. It is recommended to place the sign in a fixed position, weld it after welding, insert it into the lower part of the tube, and then fix it. Then tighten the other half of the tube and tighten it. Do not directly weld the bottom plate of the steel wire hose clamp.
On the grounding rail, the rail can be welded to the foundation or fixed with screws. Then push the guide rail nut onto the slide rail and rotate it 90 degrees. Insert the lower half of the pipe into the nut, put it into the pipe you want to fix, and then put it in. Both the upper part of the tube and the lid are fixed with screws.
For stacking device, the guide rail can be welded on the foundation or fixed with screws. Install the upper and lower halves of the pipe first, then fix the upper half of the pipe, and then tighten the anti-loosening cap to avoid replacement. Then install the wire hose clamp as described above.
When the pipe bending device is bent, the steel wire hose clamp shall be directly fixed on the front and back of the bending pipe. It is required that this support point should be in a fixed direction.
关键词：
Cheap,wire,hose,clamp,supplier(s),china,Low,price,wire,hose,clamp,from,China,manufacturer
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.