Hose clamp quick release analysis what is a hose clamp
Time of Release：
2021-09-10
The quick release of the hose clamp is considered to be on the ground rail. The rail can be welded to the foundation or fixed with screws.
The quick release of the hose clamp is considered to be on the ground rail. The rail can be welded to the foundation or fixed with screws. Then, push the rail nut into the rail and turn it 90 degrees, insert the lower half of the tube clamp body into the nut, and put it on. For the fixed pipe, put the upper half of the pipe clamp body and the cover plate, and fix it with screws.
Hose clamp quick release talk about the application range of hose clamp
Hose clamp quick release light series pipe clamps are used for ordinary mechanical pressure pipes of 6 sizes series, the outer diameter of the pipe is 6-57mm.
Duplex series pipe clamps are used for mechanical pressure pipes of 5 sizes series, the outer diameter of the pipe is 6-42mm.
Hose clamp quick release heavy-duty series pipe clamps are used for high mechanical pressure pipes of 8 sizes series, the outer diameter of the pipe is 8-273mm.
Hose clamp quick release material characteristics
The hose clamp quickly releases the hose clamp density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, and color.
Hose clamp quick release installation procedure
Before assembling the hose clamp quick release assembly on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld on the welding, insert the lower half of the pipe clamp body, and fix it. Of the tube. Then put the other half of the pipe clamp body and cover plate, and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed.
Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, through the anti-loosening cover plate Prevent it from turning. Then install two pipe clamps in the same way as above.
Hose clamp quick release elbow assembly, when assembling the elbow, it should be directly fixed with the Yongsheng pipe clamp on the front and back of the elbow. It is recommended that such a support point should be a fixed position.
关键词：
Low,price,hose,clamp,quick,release,supplier(s),china,china,hose,clamp,quick,release,company
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.