Features of hydraulic hose clamp
Time of Release：
2021-09-08
The scope of application of hydraulic hose clamps:1. The scope of application of pipe clamps. Light pipe clamps are suitable for ordinary mechanical pressure pipes of 6 sizes, with an outer diameter of 6-57 mm.
The scope of application of hydraulic hose clamps:
1. The scope of application of pipe clamps. Light pipe clamps are suitable for ordinary mechanical pressure pipes of 6 sizes, with an outer diameter of 6-57 mm. Duplex series pipe clamps are suitable for five sizes of mechanical pressure pipes, with an outer diameter of 6-42 mm. The heavy-duty series of pipe clamps are suitable for high mechanical pressure pipes with 8 sizes and 8-273 mm outer diameter.
2. The characteristic density, bending strength, impact toughness, compressive strength, elastic modulus, tensile strength, temperature resistance and color of the pipe clamp material
3. Before assembling the hydraulic hose clamp on the welding plate, in order to better determine the direction of the pipe clamp, it is recommended to mark the fixing place first, and then weld, embed the lower part of the pipe clamp body and put it into the pipe to be fixed. . Put on the hydraulic hose clamp body and the other half of the cover, and tighten them. Never use the installed hydraulic hose clamp to directly weld the bottom plate. On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and rotate it 90 degrees. Insert the lower half of the pipe clamp into the nut, put it into the pipe to be fixed, and then put the upper half of the hydraulic hose clamp and cover plate, and fix it with screws. When stacking and assembling, the guide rail can be welded on the foundation or fixed with screws. First install the lower part of the pipe clamp, and then install the upper part of the hydraulic hose clamp, and fix it with screws, and prevent it from rotating by locking the cover. Then install the second pipe clamp in the same way as above. Assembling the elbow, when assembling the elbow, it should be directly fixed at the front and back of the elbow with a hydraulic hose clamp. It is recommended that such a support point should be a fixed position.
What is the function of hydraulic hose clamps?
The hydraulic hose clamp is responsible for fixing and ensuring the reasonable transportation of the pipeline, which is safer. If the fixed pipe clamp is not installed properly, or the geometric bending size design is unreasonable, the vibration force of the machine body cannot be overcome. Fracture also occurs when resonance occurs. The jumper pipe of the hydraulic hose clamp sleeve prevents mutual influence due to the expansion of the pipe and the deformation of the wall. Through the structural deformation joints, the natural deformation of the house will damage the pipeline; when passing through the general wall, the expansion and contraction deformation of the pipeline or the fluid temperature change will crack the wall. The hydraulic hose clamp is an important part of any pinch valve and is the core of the pinch valve, providing corrosion resistance, anti-wear and pressure-bearing capabilities. The quality of the hydraulic hose clamp depends on the quality of the casing. Use pneumatic, electric, manual or hydraulic drive to squeeze the casing to achieve the function of switch/adjustment. Hydraulic hose clamps are mainly used to fix various pipes in hydraulic and pneumatic systems. They are ideal fasteners for various pipelines with oil, water and gas as the medium. The hydraulic hose clamp uses high pressure (≤320kgf/cm2) and has vibrating pipelines, and can work normally under the conditions of -35℃ to +110℃.
关键词：
Cheap,hydraulic,hose,clamp,Wholesale,Price,Wholesale,hydraulic,hose,clamp,products,on,sales
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.