Detailed introduction about hydraulic hose clamp
Time of Release：
2021-09-08
Hydraulic hose clamp Material: The upper cover plate and the lower bottom plate are made of carbon steel, and the middle pipe clamp body is made of plastic.
Hydraulic hose clamp Material: The upper cover plate and the lower bottom plate are made of carbon steel, and the middle pipe clamp body is made of plastic.
Surface treatment method: surface treatment is galvanized, other surface treatment methods can be selected according to requirements
It can be used in metallurgy, mining, chemical, coal, heavy machinery, construction machinery, shipbuilding, textile and agricultural machinery industries.
Application range of hydraulic hose clamps:
Light series hydraulic hose clamps are used for ordinary mechanical pressure pipes of 6 sizes series, the outer diameter of the pipe is 6-57mm. Duplex series hydraulic hose clamps are used for mechanical pressure pipes of 5 sizes series, the outer diameter of the pipe is 6-42mm. The heavy-duty series of hydraulic hose clamps are used for high mechanical pressure pipes of 8 sizes series, the outer diameter of the pipe is 8-273mm.
2. Material characteristics of hydraulic hose clamps
Density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color
3. Installation procedure of hydraulic hose clamp
Before assembling on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld the welding, insert the lower part of the pipe clamp body, and put the pipe to be fixed . Put on the other half of the pipe clamp body and cover plate, and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put it The upper half of the pipe clamp body and the cover plate are fixed with screws.
Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body , fixed with screws, through the anti-loosening cover plate Prevent it from turning. Then install the second pipe clamp in the same way as above.
The assembly of the elbow, when assembling the elbow, should be directly fixed with Yongsheng pipe clamps at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.
Classification of hydraulic hose clamps:
1. Hydraulic hose clamp is divided into full circle heavy pipe clamp, full circle light pipe clamp, long head half pipe clamp, short head half pipe clamp, rotating pipe clamp, rotating felt pipe clamp, J type pipe clamp, etc. according to the shape of Ningbo Hanlin Electric Limited company classification.
2. Hydraulic hose clamp is divided into plastic ABS pipe clamp, aluminum alloy pipe clamp, stainless steel pipe clamp, carbon steel pipe clamp, etc. according to the material. Classified by materials commonly used in the market.
关键词：
Low,price,hydraulic,hose,clamp,supplier(s),china,china,hydraulic,hose,clamp,company
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.