Application of worm drive hose clamps stainless steel in the industry
Time of Release：
2021-06-24
Worm drive hose clamps stainless steel has a wide range of uses, and it is widely used in many industries. Many pipe clamp installers do not operate properly, resulting in many problems in the later stage of installation. Worm drive hose clamps stainless steel manufacturers will talk about pipes today.
Worm drive hose clamps stainless steel has a wide range of uses, and it is widely used in many industries. Many pipe clamp installers do not operate properly, resulting in many problems in the later stage of installation. Worm drive hose clamps stainless steel manufacturers will talk about pipes today. The main points that should be paid attention to in the clamp assembly are as follows:
In order to determine the direction of worm drive hose clamps stainless steel very well, it is recommended to make a symbol at the fixing place before installing the device before the installation on the welding plate, and then weld it with welding, insert some into the lower half of the pipe clamp body, and fix it when it is placed. Of the tube. Then put the other half of the pipe clamp body and cover plate, and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put it The upper half of the pipe clamp body and the cover plate are fixed with screws.
Folding device, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fix it with screws, and pass through the anti-loosening cover. Avoid it to change. Then install the second worm drive hose clamps stainless steel in the same way as above.
The bending device, when installing the bending pipe, should be directly fixed with worm drive hose clamps stainless steel at the front and rear of the bending pipe. It is advocated that such a support point should be a fixed orientation.
关键词：
Cheap,worm,drive,hose,clamps,stainless,steel,Wholesale,Price,Wholesale,worm,drive,hose,clamps,stainless,steel,For,sale
Tianjin nuocheng hoop Co. Ltd.
E-mail：tjnuocheng@126.com
Tel： +86 13702098855
Fax：022-68781788
Add：Yuanmengkou Industrial Park, Yanzhuang Town, Jinghai County, Tianjin
Copyright © 2022 Tianjin nuocheng hoop Co. Ltd.